3d Printer — the Technology of the Future

Authors

  • A.A. Fayzullaev Tashkent State Technical University, Uzbekistan
  • E.Kh. Nematov Tashkent State Technical University, Uzbekistan
  • Sh. Pirnazarov Tashkent State Technical University, Uzbekistan
  • B. Dauletbaev Tashkent State Technical University, Uzbekistan
  • Sh. Komilov Tashkent State Technical University, Uzbekistan
  • R. Pardaev Tashkent State Technical University, Uzbekistan
  • S. Shokirov Tashkent State Technical University, Uzbekistan

Keywords:

3D printer, 3D printing, stereolithography, SLA technology, SLS technology, DLP technology, EBM technology.

Abstract

This article will discuss a new technology for creating objects and items — a 3D printer. The history of its origin is described, the basic principles and technologies of the device are indicated. A study of the use of a 3D printer is conducted, and the problems and prospects of using this technology in various areas of life are highlighted.

Downloads

Published

2024-12-04

How to Cite

A.A. Fayzullaev, E.Kh. Nematov, Sh. Pirnazarov, B. Dauletbaev, Sh. Komilov, R. Pardaev, & S. Shokirov. (2024). 3d Printer — the Technology of the Future. American Journal of Engineering , Mechanics and Architecture (2993-2637), 2(12), 82–84. Retrieved from http://grnjournal.us/index.php/AJEMA/article/view/6285

Issue

Vol. 2 No. 12 (2024): American Journal of Engineering, Mechanics and Architecture

Section

Articles

Most read articles by the same author(s)