STUDYING THE PROCESS OF PRODUCING SODIUM SILICATE AND FLUORIDE FROM Na2SiF6 BY HYDROLYSIS WITH SODIUM HYDROXIDE

Authors

  • Sakhomiddin Khodjamkulov Associate professor of the Termez Institute of Engineering and Technology. Termez, Uzbekistan
  • Khaltura Mirzakulov Professor of the Tashkent Institute of Chemical Technology. Tashkent, Uzbekistan
  • Abror Nomozov Assistant professor of the Termez Institute of Engineering and technology, Termez, Uzbekistan
  • Sirojiddin Zoirov Student Department of Chemical Technology, Termez Institute of Engineering and Technology. Termez, Uzbekistan

Keywords:

silicon dioxide, sodium silicate, Na2SiF6, sodium hydroxide, defluoridation

Abstract

In this paper, to return acid-soluble silicon dioxide to the initial stage of the process of defluoridation of EPA in the form of a sodium silicate solution, the solid phase that has passed through the stages of filtration and washing is hydrolyzed with a NaOH solution. The hydrolysis products of Na2SiF6 are NaF and CaF2. Results of studies on the influence of the norm on the degree of hydrolysis and the change in the L:S ratio, as well as on the chemical composition of the solid and liquid phases during the hydrolysis of Na2SiF6 with sodium hydroxide.

Downloads

Published

2024-03-18

How to Cite

Khodjamkulov, S., Mirzakulov, K., Nomozov, A., & Zoirov, S. (2024). STUDYING THE PROCESS OF PRODUCING SODIUM SILICATE AND FLUORIDE FROM Na2SiF6 BY HYDROLYSIS WITH SODIUM HYDROXIDE. American Journal of Engineering , Mechanics and Architecture (2993-2637), 2(3), 72–78. Retrieved from http://grnjournal.us/index.php/AJEMA/article/view/3771

Issue

Vol. 2 No. 3 (2024): American Journal of Engineering , Mechanics and Architecture

Section

Articles